Dolgan Makina / Yazan

İLAÇ VE SOLÜSYON SÜRME MAKİNALARI / MH 200

Boyutları: 70 x 70 x 115 cm
Ağırlık: 55 kg
Sürme Alanı: 200 mm
Voltaj: 380V
Motor Devir: 1425 d/d
Motor Gücü: 0,25 kw

İLAÇ VE SOLÜSYON SÜRME MAKİNALARI (İPEK MERDANELİ) MH 160

Boyutları: 70 x 780 x 115 cm
Ağırlık: 55 kg
Sürme Alanı: 160 mm
Voltaj: 380V
Motor Devir: 1425 d/d
Motor Gücü: 0,25 kw

İLAÇ VE SOLÜSYON SÜRME MAKİNALARI / MH 150

Boyutları: 65 x 90 x 185 cm
Ağırlık: 70 kg
Sürme Alanı: 150mm
Fan Voltajı: 220 V
Fan Motor Devir: 830 d/d
Voltaj: 380 d/d
Motor Devir: 1070
Motor Gücü: 0,25

İLAÇ VE SOLÜSYON SÜRME MAKİNALARI / MH 140

Boyutları: 65 x 80 x 115 cm
Ağırlık: 52 kg
Sürme Alanı: 140 mm
Voltaj: 380V
Motor Devir: 1425 d/d
Motor Gücü: 0,25 kw

MH-35 VARDOLA ve TABANA İLAÇ SÜRME MAKİNASI

Boyutları: 60 x 80 x 115 cm
Ağırlık: 50 kg
Sürme Alanı: 35 mm
Voltaj: 380V
Motor Devir: 1425 d/d
Motor Gücü: 0,25 kw

OTOMATİK TABAN KENARI BOYAMA MAK. M-93

* HIZ AYARLI
* TABAN KENARI BOYAMA
* VARDOLALI VEYA VARDOLASIZ BOYAMA
* COSMOPOL

G303 – OTOMATİK VARDOLA DÖNME MAKİNESİ

* OTOMATİK VARDOLA DÖNME MAKİNESİ
* FARKLI KALINLIKLARA VARDOLA DÖNEBİLME
* KÖSELE – NEOLİT – EVAYA VARDOLA DÖNME
* KOLAY KULLANIM
* MANUEL KESME SİSTEMİ

Welt applying machine on leather or synthetic soles , with  automatic slackening of speed on the top and the heel, with the possibility  to adjust separately the speed of the upper roll and the transport roll

G303 with movable arm has the possibility to apply the welt on soles with  different thickness till 30 mm. It’s also possible to adjust separately the speed  on the heel. Manual cut of the welt, universal guide for welt and transports  with different diameters.

G3000 – OTOMATİK ELEKTRONİK VARDOLA DÖNME MAK.

* OTOMATİK VARDOLA DÖNME MAKİNASI
* KOLAY KULANIM
* AYARLAMASI KOLAY
* ELEKTRONİK FOTOCELLİ
* HIZ AYARLI
* OTOMATİK KESMELİ

F808 – ÖKÇE YERİ TIRPAN MAKİNESİ

* OTOMATİK C ÖKÇE TIRPAN MAKİNESİ
* KÖSELEYİ KOMPLE TIRPAN YAPAR

This new model. technically improved, allow to have a more quick production. Equipped with a device to control where make the roughing, the F808 can be used also for total roughin of the sole.

S505 – OTOMATİK İÇ OYMA MAKİNESİ

 

* OTOMATİK İÇ OYMA MAKİNESİ
* YATAY İÇ OYMA

With automatic slackening of speed on the top and the heel the  machine is equipped with transports diameter 20-25-30 mm. to work on  different tops and with movable arm to rough different thickness. By special  cutters is possible to have jourdan process and to remove the material inside  the welt. S505 machine is equipped with a mouth near the cutter to be  connected to the aspirator to take away the dusts.

P50Z – VİBRASYONLU ARKA TRAŞ MAKİNESİ

*VİBRASYONLUDUR.
* MÜKEMMEL TRAŞ YAPAR.

P50 Z Yarı otomatik taban inceltme makinesi, kösele, neolit veya benzeri malzemeli
tabanları, mal besleme bölümünden otomatik olarak geri itiş ile inceltir. Yeni – patentli
titreşimli bıçak ile kesim sistemi ile tabanların arkalarının kusursuz bir iş ve uniform
incelmesini sağlar, bu özellik malzemenin esnemesini engeller Aynı zamanda sabit bıçak ile
çalışmak da mümkündür.

Yeni lazer pozisyonlama sistemi ile, malzemenin nasıl ve nerede inceltileceği belirlenir.
Arzu edilmesi halinde makinaya, tabanın yarılması için (sandviç tipi) SW özelliği ilave
etmek mümkündür.

P4000 – OTOMATİK DESEN , DEVİRME , KANAL AÇMA

 

* OTOMATİK DESEN ,DEVİRME KANAL AÇMA MAKİNESİ
* HARAMA AÇMA
* KANAL OULK AÇMA
* ARKALARDA VARDOLA TRAŞ
* DESEN YAPMA
* BİRLEŞİK TABANLARI OYUP KENARINI VARDOLA ÇIKARMA

1)Grooving and channel on trimmed soles
2)Cutting one or two visible grooves in trimmed soles
3)Hollowing out compound soles; one sole has the bottom thickness
and other the welt thickness. So, you obtain simultaneously a sole 
with insole and welt.
4)Removing the welt around the heel seat 
5)Marking and ornament
6)Bending the trim for jourdan processing
7)Double channel for goodyear work 
8)Channel and sole ornament silmultaneously
With slackening of speed on the top and on the heel and with
possibility to have tables and transports on different sizes

K100 – PANTOGRAF MAKİNESİ

* ÇİFT BIÇAKLIDIR
* ELEKTRONİK HIZ AYARLIDIR
* LAZERLE YAPILAN İŞİ ORTALAMA

With DOUBLE CUTTER diam.5/22mm. or diam.8/30mm. with AUTOMATIC CHANGE OF THE CUTTER WITHOUT STOPING THE WORK.
You can use also single cutter by 2mm. to 200 mm. diametre
The machine is supplied with a depression system to block the sole and has an electronic speed variator to allow these workings on all different materials, leather, tunit or particular rubbers.

KOLLU JURDAN 3 BIÇAKLI

 

* ÜÇ BIÇAKLIDIR
* OTOMATİK START- STOPLUDUR.

S5000 ELEKTRONİK İÇ OYMA MAKİNESİ

ELEKTRONİK TABAN PİYANTA İÇ OYMA MAKİNASI
Kösele veya sentetik malzeme, vardolalı veya vardolasız, köşeli veya sivri burunlu tabanların piyanta frezeleme iç oyma ve arka iç oyma işlemlerini yapar.

               Makinenin Özellikleri

  1. Değişik kalınlıklarda çalışabilme,
  2. Elektronik fotoseller ile taban pozisyonu belirleme
  3. Burun, piyanta ve ökçede farklı hız ayarı
  4. Freze hız ayarı ve birbirinden bağımsız ayarlanabilen ve farklı ebatlarda taşıyıcı kafa
  5. Burunda ve ökçede çukur oluşturmadan çalışma sistemi.
  6. Vakum sistemi ile taban kavrama
  7. Çalıþma alanı programlama imkanı
  8. Sivri burunlarda otomatik stop imkanı
  9. Aynı taban üzerinde farklı kalınlıklar ile iç oyma YENİ ÖZELL

P52 S3 KOLLU JURDAN MAKİNESİ

* OTOMATİK KOLLU JURDAN
* 3 BIÇAKLIDIR

The setting of the profile sequence to be carried out is made through a computer integrated in the machine control panel and is extremely easy, when the sole holding clamps handle stops, the operator must only push one buttom to change to the programmed following profile, thanks to the motorised sole-holder arm and its automatic positioning.

The sequence of the profiles established for each type of sole can be stored and recalled any time you wish to start the production of that kind of sole again, without having to readjust the machine again.

The P.52S3 can make on the soles also one or two profiles, like the machine model P.52SS of our construction, of which it keeps the main structure and all those advantages due to the sole auto-centering device; it eliminates, however, the need for the research of the precise alignment between the cutter and the sole by using spacers in the assembling on the cutter (thanks to the motorised sole-holder shaft) as well as having to set manually the starting and ending points of each profile and having to re-adjust the machine each time that you have to produce a type of sole previously made.

OUTPUT: The machine can work approximately 3000 pairs of soles in 8 hours with one pair loaded at a time. By loading several the output can be increased in proportion.

ACCESSORIES: Nr. 1 template and nr. 2 standard counter-templates, nr. 1 template boring jig, nr. 13 feeler rings for each spindle, nr. 1 emery cloth wheel, nr.1 feeler ring for emery band wheel, service spanner.

  • Installed power: Kw 3.5
  • Cutter spindle diameter: mm. 19
  • Tool working height: mm. 80
  • Max. milling thickness:.. mm. 70
  • Max clamp spread (without template and countertemplates): mm. 110
  • Max. air consumption:. Nl/min. 15
  • Net weight:.. Kg. 530
  • Net weight in overseas case: Kg. 580
  • Dimensions of machine: mm. 700x950x1420h
  • Dimensions of overseas case: mm. 980x1180x1660h

Mod 950 OTOMATİK ÖKÇE ÇAKMA MAKİNASI

* İKİ İSTASYONLUDUR
* ZENNE , MERDANE TABAN ÖKÇE ÇAKMA
* OTOMATİK ÇİVİ HAZNELİDİR
* SIKIŞTŞRMA ZAMAN AYARLIDIR
* KOLAY KULLANIM

MOD. 940/D

12 nails 1 woman’s working station electronic automatic heel nailing machine for soles factories.

MOD. 940/U

12 nails 1 man’s working station electonic automatic heel nailing machine for soles factories.

MOD. 950

12 nails 2 woman’s and man’s working station electonic automatic heel nailing machine for soles factories.

MOD.940/D

  • Direct and sequential nailing.
  • Adjustable well pressing stand-jack with inclined hammers.
  • Nails from 8 mm. to 25 mm.

MOD. 950 – 940/U

  • Stand-jack for men’s shoes with adjustable width.
  • Self-adjusting welt pressing machine.
  • Sole centering pliers.
  • Automatic sole ejection.
  • Nails from 8 mm. to 25 mm.

MOD. 940/D

12 nails 1 woman’s working station electronic automatic heel nailing machine for soles factories.

MOD. 940/U

12 nails 1 man’s working station electonic automatic heel nailing machine for soles factories.

MOD. 950

12 nails 2 woman’s and man’s working station electonic automatic heel nailing machine for soles factories.

MOD.940/D

  • Direct and sequential nailing.
  • Adjustable well pressing stand-jack with inclined hammers.
  • Nails from 8 mm. to 25 mm.

MOD. 950 – 940/U

  • Stand-jack for men’s shoes with adjustable width.
  • Self-adjusting welt pressing machine.
  • Sole centering pliers.
  • Automatic sole ejection.
  • Nails from 8 mm. to 25 mm.
    оборудование для производства обуви купить
    оборудование для производства обуви купить в украине
    оборудование для производства обуви купить интернет
    оборудование для производства обуви купить в харькове
    оборудование для производства обуви купить в россии
    оборудование для производства обуви б/у харьков

    оборудование для производства обуви б/у

    оборудование для производства обуви